Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…
Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.02. Dry solids content (EN ISO 3251) (%): approx. 5. Dilution rate: supplied ready to use.…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…
Where to use: • Waterproofing indoor floor and wall surfaces that are not subject to rising damp or in permanent water immersion. • Flexible, anti-fracture membrane. Apply before the installation of…
Where to use: • Waterproofing indoor floor and wall surfaces that are not…
ANTIRADICE LIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering good performance, by virtue of a higher percentage of polymers such as POLYPROPYLENE (APP) and POLYOLEFIN (APAO). Its…
ANTIRADICE LIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering…
Cold flexibility: -20°C ELASTOFLEX SA P is a top-quality prefabricated SELF-ADHESIVE bitumen membrane produced using ADESO® technology, the innovative ELASTOMERIC (SBS) compound laminating system. In…
Cold flexibility: -20°C ELASTOFLEX SA P is a top-quality prefabricated…
Cold flexibility: -20°C ELASTOBOND S6 P is a prefabricated ELASTOMERIC waterproofing membrane offering excellent performance. Made from a special modified distilled bitumen compound with a high…
Cold flexibility: -20°C ELASTOBOND S6 P is a prefabricated ELASTOMERIC…
TREND HS and TREND HS MINERAL are prefabricated waterproof plastomeric membranes capable of offering excellent performance. They are made from a POLYPROPYLENE-modified distilled bitumen compound and…
TREND HS and TREND HS MINERAL are prefabricated waterproof plastomeric…
BITULIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering good performance, by virtue of a higher percentage of polymers such as POLYPROPYLENE (APP) and POLYOLEFIN (APAO). Its special…
BITULIGHT P is a prefabricated ELASTOMERIC-PLASTOMERIC membrane offering good…
ADVANTAGES: Produced without the use of fossil resources and packed in recycled plastic cartridges to reduce environmental impact Solvent-free, with very low emission of Volatile Organic Compounds…
ADVANTAGES: Produced without the use of fossil resources and packed in recycled…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious skimcoat compound for the repair and levelling of interior substrates, including, floors and steps. Planiprep Fix can be…
Planiprep Fix is an ultra-fast drying, fine-grained, thixotropic, cementitious…
TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…
Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material.
Two-component, high-performance, highly-deformable, quick-setting and drying…
TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…
TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
Two component low viscosity epoxy resin for injection. Epojet LV is used to attribute the monolithic nature to cracked structures and for bonding and structural strengthening of concrete and masonry…
Two component low viscosity epoxy resin for injection. Epojet LV is used to…
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3 hours. Thickness applied: from 2 to 20 mm. Waiting time before laying ceramic and natural stone:…
TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings.…
