Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish with excellent resistance to
wear and abrasion Mapecoat SF is used to form a seamless, film-forming coat with good…
Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish…
High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.
High-performance, anti-efflorescence, quick-setting and drying polymer-modified…
The only flooring adhesive you need in the back of your van. Rapid and strong initial tack, very long open time, good dimensional stability, strong and tenacious final adhesion: the best performance…
The only flooring adhesive you need in the back of your van. Rapid and strong…
Synthetic resin primer in solvent, specific for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.
Synthetic resin primer in solvent, specific for improving adhesion of…
DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …
DESCRIPTION: Low viscosity ready-mixed mortar with high compressive strength and resistant to de-icing salts, freeze-thaw cycles and seawater, with exceptional physical chemical characteristics…
DESCRIPTION: Low viscosity ready-mixed mortar with high compressive strength…
DESCRIPTION: Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for…
DESCRIPTION: Pre-blended mortar with high compressive strength and good…
DESCRIPTION: Three-component easy-to-apply high-strength polyurethane/cement-based mortar with high resistance to chemicals for coating industrial floors in layers from 4 to 6 mm thick. TECHNICAL…
DESCRIPTION: Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm. Complies with standards applied in…
High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including…
High-performance, deformable, rapid-setting and hydrating, non-slip…
Save time and money Fast track your next interior levelling project Two coat application - apply the second as soon as the first coat is dry Install a levelling compound 2 to 5 hours after the second…
Save time and money Fast track your next interior levelling project Two coat…
High-elasticity multi-layered system made from two-component polyurethane resin in combination with granular rubber matting for indoor playing surfaces.
High-elasticity multi-layered system made from two-component polyurethane resin…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 80 : 20. Colour of mix: coloured. Please contact Head Office. Consistency of mix: liquid/paste. Density of mix: 1.35 kg/m³. Viscosity of mix:…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 80 : 20. Colour of mix:…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 40 : 60. Colour of mix: beige - grey. Consistency of mix: self-levelling paste. Pot life at +23°C: 20 minutes. Dusty dry: 6 hours. Set to light foot…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 40 : 60. Colour of mix: beige…
TECHNICAL DATA: Consistency: thixotropic paste. Colour: ochre yellow. Open time: approx. 40 ± 10 minutes. EMICODE: EC 1 R Plus - very low emission. Set to foot traffic: after 12 hours. Storage: 12…
-ltd-logos/mapei---header-logo.png?sfvrsn=31878676_6){kind=logo}
-ltd-logos/mapei-mobile-logo-266-x-62.png?sfvrsn=30878676_2){kind=logo}
_93c64f1c0c174663a851e4904f637996.png?sfvrsn=e8862d10_0)
