Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting…
Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K…
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 50-60 minutes. Set to light foot traffic: after 12 hours. Sanding: after 3 days. EMICODE: EC1 R Plus - very low emission. Storage:…
TECHNICAL DATA: Consistency: creamy paste. Colour: beige. Open time: 50-60…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU is supplied in 20…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
Two-component epoxy primer for oil contaminated cementitious surfaces. Where to use: Primer CC 200 is a special primer specifically formulated for oil contaminated cementitious surfaces and it is…
Two-component epoxy primer for oil contaminated cementitious surfaces. Where to…
HIGH-ELASTICITY MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION AND GRANULAR RUBBER MATTING FOR PROFESSIONAL INDOOR AND OUTDOOR TENNIS COURTS
HIGH-ELASTICITY MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER…
Acrylic waterborne, rapid film-forming, coloured coating to protect concrete and asphalt surfaces subject to a high level of footfall, including driveways.
Acrylic waterborne, rapid film-forming, coloured coating to protect concrete…
76208020001 - SPIDER P SA 2 MM | 76208035002 - SPIDER P SA 3.5 MM Cold flexibility:-10°C SPIDER P SA is a prefabricated SELF- ADHESIVE bituminous membrane of excellent quality, made with ADESO®…
76208020001 - SPIDER P SA 2 MM | 76208035002 - SPIDER P SA 3.5 MM Cold…
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…
Two-component, versatile, decorative, acid-resistant epoxy grout, with a…
One-component, high-performance, deformable, lightweight, cementitious adhesive with no vertical slip and extended open time, Low Dust technology and extremely high yield. Easy to apply by trowel…
Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish with excellent resistance to
wear and abrasion Mapecoat SF is used to form a seamless, film-forming coat with good…
Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish…
High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.
High-performance, anti-efflorescence, quick-setting and drying polymer-modified…
The only flooring adhesive you need in the back of your van. Rapid and strong initial tack, very long open time, good dimensional stability, strong and tenacious final adhesion: the best performance…
The only flooring adhesive you need in the back of your van. Rapid and strong…
Synthetic resin primer in solvent, specific for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.
Synthetic resin primer in solvent, specific for improving adhesion of…
DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …
-ltd-logos/mapei---header-logo.png?sfvrsn=31878676_6){kind=logo}
-ltd-logos/mapei-mobile-logo-266-x-62.png?sfvrsn=30878676_2){kind=logo}
-ltd-logos/mapei-mobile-retina-532-x-124.png?sfvrsn=3e878676_2)
_65a0f53e9f664d7d8284205fb817e320_1f8d968725fc456299808646068b5f41.png?sfvrsn=8905200a_0)
