Adesilex PG2 TG is a two-component product based on epoxy resins, selected fine-grain aggregates and special additives according to a formula developed in the MAPEI research laboratories.
Adesilex PG2 TG is a two-component product based on epoxy resins, selected…
Antipluviol S-MY is a water-repellent impregnation for application on concrete and masonry structures to resist the penetration of water-borne aggressive agents such as chlorides. It is also used as…
Antipluviol S-MY is a water-repellent impregnation for application on concrete…
ADVANTAGES: Rapid, easy application; Protection against chemical attacks from de-icing salts; May be coated after just 24 hours (at +23°C and 50% R.H.) with epoxy or polyurethane resin formulates;…
ADVANTAGES: Rapid, easy application; Protection against chemical attacks from…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…
Two-component, protective acrylic filming agent in water dispersion for…
Ready to use mixture of sand and cement mixed with KERACRETE latex. This mixture forms a high-performance adhesive with no vertical slip and is suitable for ceramic tiles, glass mosaic and stone…
Ready to use mixture of sand and cement mixed with KERACRETE latex. This…
Colouring system for Mapefloor Mapecolor Paste is a coloured paste which may be added to neutral epoxy formulates such as Primer SN, Mapefloor I 300 SL, Mapefloor I 350 SL, Mapefloor I 500 W,…
Colouring system for Mapefloor Mapecolor Paste is a coloured paste which may be…
One-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: no. Application…
One-component, solvent-free primer for polyurethane sealants, for use on…
Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…
Two-component epoxy binder used for preparing trowelled mortar with a damp…
Two-component, epoxy binder Mapefloor I 910 is specially formulated to obtain a better hold in epoxy and polyurethane resin systems, and as a binder when mixing mortar with a consistency similar to a…
Two-component, epoxy binder Mapefloor I 910 is specially formulated to obtain a…
Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…
Transparent, silane and siloxane water-repellent impregnator in watery…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a white water emulsion of special resins which forms an effecient curing film on concrete. Mapecure SP provides reliable…
Film-forming curing compound in water emulsion for concrete. Mapecure SP is a…
Expansive agent for concrete. Expancrete is a powder admixture used to manufacture shrinkage-compensated concrete and mortars. Expancrete is suitable for water tight castings and castings that…
Expansive agent for concrete. Expancrete is a powder admixture used to…
