Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…
Levelling mortar for interior and exterior walls and ceilings. Applications:…
Two-component free-flowing elastic polyurethane sealant with a low modulus of elasticity, for joints with movements up to 25% with low modulus of elasticity, resistant to hydrocarbons. TECHNICAL…
Two-component free-flowing elastic polyurethane sealant with a low modulus of…
Coloured acrylic resin-based coating product in water dispersion with selected fillers for indoor and outdoor tennis courts and multi-purpose playing surfaces, certified by the ITF (International…
Coloured acrylic resin-based coating product in water dispersion with selected…
Fine-grained coloured coating made from acrylic resin in water dispersion and micro-granular quartz sand, for indoor and outdoor tennis courts, multi-purpose playing fields, cycle tracks and footpaths
Fine-grained coloured coating made from acrylic resin in water dispersion and…
Two-component, solvent-free, epoxy resin for roller coat system. Mapefloor I 312 is a two-component epoxy formulation suitable for roller coat application with an attractive smooth or anti-slip…
Two-component, solvent-free, epoxy resin for roller coat system. Mapefloor I…
Three-component epoxy mortar for wear-resistant floors. For use as a wear-resistant, epoxy mortar topping on concrete floors subjected to high mechanical and abrasion loads and heavy traffic or as a…
Three-component epoxy mortar for wear-resistant floors. For use as a…
Mapefloor CPU-HD 900 AP is a polyurethane-cement mortar screed with excellent mechanical properties and high-resistance to thermal shock and chemical attack, for 6-9mm industrial floor applications.
Mapefloor CPU-HD 900 AP is a polyurethane-cement mortar screed with excellent…
Polyurethane-cement, self-smoothing topping with high chemical-resistance and excellent mechanical properties, for 3-6 mm industrial floor applications
Polyurethane-cement, self-smoothing topping with high chemical-resistance and…
Mapecoat CF-AP has been specially developed to provide a protective, UV-resistant, abrasion-resistant and high temperature resistant coating on resin floors such as epoxy and…
Mapecoat CF-AP has been specially developed to provide a protective,…
Mapefill 318 is a preblended powdered grout composed of high strength cement, graded 1.2mm aggregates and special additives with expansion agents formulated by the MAPEI research laboratories.
Mapefill 318 is a preblended powdered grout composed of high strength cement,…
ADVANTAGES: Environmentally-friendly and does not emit noxious fumes, being water-based and low in VOC. Single-component for easy application by air-less spray, brush or roller. Excellent adhesion to…
ADVANTAGES: Environmentally-friendly and does not emit noxious fumes, being…
