Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA: Consistency:…
Light-coloured adhesive in water dispersion with very low emission level of…
One-component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely…
One-component, high-performance, deformable, lightweight, rapid-setting and hydrating cementitious adhesive with no vertical slip, good trowelability, high wetting capacity and very high yield, for…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or hammer-drill.…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL…
Paintable acrylic sealant with a render-effect finish for movements up to 12.5%. TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.11 N/mm². Shore A hardness: 15.…
Paintable acrylic sealant with a render-effect finish for movements up to…
Self-levelling, ultra-quick setting mortar with special hydraulic binders, applied at a thickness between 5 and 15 mm to create abrasion-resistant internal floors TECHNICAL DATA: Colour: white, light…
Self-levelling, ultra-quick setting mortar with special hydraulic binders,…
Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls…
Agent applied by injection made from micro-emulsion, concentrated silane and siloxane used to form a chemical barrier against capillary rising damp in masonry. TECHNICAL DATA: Dimension of particles:…
Agent applied by injection made from micro-emulsion, concentrated silane and…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…
Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render. TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with…
Quick-setting, light-grey coloured fine mortar for repairing and smoothing…
High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…
High-strength glass fibre cord to be impregnated with MAPEWRAP 21…
High-strength carbon fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: high-strength carbon.…
High-strength carbon fibre cord to be impregnated with MAPEWRAP 21…
Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…
Synthetic resin primer in water dispersion with a very low content of volatile…
Self-levelling, fibre-reinforced, quick-hardening smoothing compounds for thicknesses from 3 to 10 mm. Particularly recommended for wood. TECHNICAL DATA: Where to use: internal ceramic, natural…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
Hi-flow, steel fibre-reinforced compensated-shrinkage, quick-setting and hardening, high-ductility cementitious mortar applied at temperatures down to -5°C, with stiff steel fibres for repairing…
