Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…
High strength, transpirant, natural hydraulic lime-based masonry mortar with very low emission level of VOC for general building work, reinforced masonry and patching and plumbing walls. TECHNICAL…
High strength, transpirant, natural hydraulic lime-based masonry mortar with…
Cement-free, fibre-reinforced, lightweight elastic flexible skimming paste resistant to biological agents for internal and external use. Available in the following granulometries: 0.5 mm and 1.5 mm.…
One-component silylated polymer-based adhesive with zero plasticiser and solvent content and very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: creamy paste.…
One-component silylated polymer-based adhesive with zero plasticiser and…
Fast grip, high performance adhesive in water dispersion for quick renovation of resilient floor coverings and for installing skirtings, coves and profiles. TECHNICAL DATA: Consistency: creamy paste.…
Fast grip, high performance adhesive in water dispersion for quick renovation…
Universal high temperature adhesive in water dispersion with very low emission level of volatile organic compounds for resilient floor coverings. TECHNICAL DATA: Consistency: creamy paste. Colour:…
Universal high temperature adhesive in water dispersion with very low emission…
Ultra rapid-drying fine textured thixotropic cementitious skimming compound, suitable for levelling and skimming new and existing internal substrates (from a feather-edge up to a maximum of 3 mm) to…
Ultra rapid-drying fine textured thixotropic cementitious skimming compound,…
Structural R4-class, rapid-setting, shrinkagecompensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete
Pure epoxy resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars, and C2 seismic loads. TECHNICAL DATA: Suitable substrates: all solid and perforated…
Pure epoxy resin-based chemical anchor for structural loads. Certified for…
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability. TECHNICAL DATA:…
Fibre-reinforced LVT adhesive. Specifically developed for the installation of…
Neutral mould-resistant silicone sealant for building work for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100% elongation: 0.37 N/mm². Shore A hardness:…
Neutral mould-resistant silicone sealant for building work for movements up to…
Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA: Consistency:…
Light-coloured adhesive in water dispersion with very low emission level of…
One-component, high-performance, highly-deformable, lightweight, rapid-setting and hydrating cementitious adhesive with extended open time, good trowelability, high wetting capacity and extremely…
One-component, high-performance, deformable, lightweight, rapid-setting and hydrating cementitious adhesive with no vertical slip, good trowelability, high wetting capacity and very high yield, for…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or hammer-drill.…
Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL…
