Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…
Smoothing mortar for internal and external walls and ceilings for thicknesses…
Dry soundproofing system for floating screeds made from high density, closed-cell foam polyethylene sandwiched to a special protective film. TECHNICAL DATA: Thickness: 6 mm. Compressibility…
Dry soundproofing system for floating screeds made from high density,…
Pre-blended, polymer-modified mortar with a low modulus of elasticity, high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional…
Pre-blended, polymer-modified mortar with a low modulus of elasticity, high…
Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed…
Pre-blended mortar with high compressive strength and good resistance to…
Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement, sandwiched to a resilient layer of polyester fibre. TECHNICAL DATA: Tensile strength: –…
Tiles with a bitumen and special polymer-based elasto-plastomeric membrane with…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric coating product for internal and external surfaces. Available in the following grain sizes: 1.2 mm. TECHNICAL DATA:…
Elastic, water-repellent, mildew and mould-resistant, hygienising, elastomeric…
Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads. TECHNICAL DATA: Suitable substrates: all solid and…
Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads.…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…
Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…
Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…
Two-component, high-performance, highly-deformable, quick-setting and drying…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick. May be coloured with MAPECOLOR PASTE. Complies with standards applied in the foodstuffs…
Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial…
Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…
Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…
Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…
Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…
Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…
Two-component, high-performance, deformable, quick-setting and drying…
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…
Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: 6-8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 3-6 hours; –…
Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…
High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…
High-performance, white cementitious adhesive with no vertical slip and…
Transpirant, high opacity, washable water-based wall paint for internal use. TECHNICAL DATA: Consistency: thick liquid. Colours: white or various colours using the ColorMap ® automatic colouring…
Transpirant, high opacity, washable water-based wall paint for internal use.…
