Three-component, high-strength polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 6 to 9 mm. Complies with standards applied in the foodstuffs…
Three-component, high-strength polyurethane-cement mortar with high resistance…
Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm. Complies with standards applied in the foodstuffs…
Three-component, self-levelling polyurethane-cement mortar with high resistance…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: fine powder.…
One-component trowellable fine-textured cementitious paste applied in layers up…
High strength natural hydraulic lime-based transpirant rendering and masonry mortar with very low emission level of VOC for making structural render, even "reinforced" and installation mortar
High strength natural hydraulic lime-based transpirant rendering and masonry…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Paintable hybrid sealant and adhesive with a high modulus of elasticity also…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane with polyester reinforcement sandwiched to a layer of resilient polyester fibre coated with blue, non-woven polypropylene…
Sheets with a bitumen and special polymer-based elasto-plastomeric membrane…
Rapid-setting assembly adhesive for internal and external use with a high sucker effect. TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 5’. Initial tensile strength: 25 N. Final shear…
Rapid-setting assembly adhesive for internal and external use with a high…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…
Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…
Soundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors. TECHNICAL DATA: Thickness: 2 mm and 4 mm. Format: –…
Soundproofing mat in sheets of rubber and cork applied on substrates before…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…
High-performance cementitious adhesive with no vertical slip and extended open…
UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral…
UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral…
Polyester, aluminium and epoxy resin metal-effect coloured glitter mixed with used for mixing with KERAPOXY DESIGN. TECHNICAL DATA: Maximum dosage: 10% by weight of KERAPOXY DESIGN. Colours: silver…
Polyester, aluminium and epoxy resin metal-effect coloured glitter mixed with…
Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an…
Two-component epoxy grout, easy to apply and excellent cleanability, with a…
