One-component, solvent-free, (according to TRGS 610) sililated polymer-based adhesive with a very low emission level of volatile organic compounds (EMICODE EC1 Plus), for all types of parquet. Where…
One-component, solvent-free, (according to TRGS 610) sililated polymer-based…
High-performance polyurethane-cement mortar developed by MAPEI’s Research Laboratories, trowel-applied in 6, 9 or 12 mm, for the protection of industrial floors, non-slip, antimicrobial and easy to…
High-performance polyurethane-cement mortar developed by MAPEI’s Research…
ADVANTAGES: Increased compressive strength Neutral setting characteristics Optimised for power float flooring Enhanced air content control Suitable for use with either ready mixed concrete or site…
TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315 %.…
TECHNICALDATA: Type of material: rubber sandwiched between two layers of…
Structural strengthening system consisting of pultruded plates In high-strength carbon fibre and epoxy resins to bond the Plates (frp) covered by certificate of technical assessment (cvt) N°…
Structural strengthening system consisting of pultruded plates In high-strength…
Single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete. Where to use: Mapeproof Swell has been specially developed to form flexible, waterproof…
Single component hydro-expansive paste supplied in cartridges, used to…
Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…
Three component epoxy-cement based special primer. Can be used on absorbent and…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…
TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP 10); 20x15 mm (IDROSTOP 15); 20x25 mm (IDROSTOP 25). Storage: 12 months. Application temperature range using IDROSTOP…
TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP…
One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4 is used to seal internal and external expansion and construction joints subject to a medium amount of movement and…
One-component acrylic sealant in aqueous dispersion. Where to use: Mapeflex AC4…
One component, ready-to-use, multi-purpose, fibre reinforced, cementitious mortar, applied using either the dry or damp spraying technique Where to use: For the repair of concrete, stone and masonry…
One component, ready-to-use, multi-purpose, fibre reinforced, cementitious…
Two-part polyurethane adhesive for the installation of conductive rubber and PVC flooring. Where to use: Bonding of rubber and PVC conductive flooring and relevant copper strips. Some application…
Two-part polyurethane adhesive for the installation of conductive rubber and…
Two-component polyurethane elastomeric, thixotropic, liquid waterproofing membrane for sealing, filling, detailing Mapeproof AL AP, Mapethene EQ/LT and Mapeproof AL 1200 AP. Where to use: Foundation…
Idrocrete KR 1000 is a powder
admixture made from special hydrophilic components which, when added to a
concrete mix, reduces the permeability of hardened concrete. Where to use: Idrocrete KR 1000…
Idrocrete KR 1000 is a powder
admixture made from special hydrophilic…
MapeWall GPR is a general purpose render for internal and external use. Where to use: MapeWall GPR is suitable for rendering and leveling internal and external masonry substrates, in thicknesses up…
MapeWall GPR is a general purpose render for internal and external use. Where…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm ³ ): approx. 1.58. Dry solids content (EN…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours…
Two-component, opaque, epoxy resin based finish specially formulated to form a shiny, protective anti-dust and anti-oil film, which is applied directly onto concrete or cementitious systems such as…
Two-component, opaque, epoxy resin based finish specially formulated to form a…
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm³): approx. 1.65-1.95 (according to the grain size).…
TECHNICAL DATA: Consistency: paste. Colour: white or various colours using the…
--30-01-2020_9587808p_ff9854a0012941f59ab66f01f191f31d.png?sfvrsn=8cff655f_0)
