Structural strengthening system consisting of high-strength high-modulus unidirectional carbon fibre fabric and epoxy resins to impregnate and bond the fabric (frp) covered by certificate of…
Structural strengthening system consisting of high-strength high-modulus…
The Mapeheat Thermo Connect is a smart and easy to use touchscreen thermostat for electrical underfloor heating. It is designed to combine the best comfort with the lowest energy consumption.
The Mapeheat Thermo Connect is a smart and easy to use touchscreen thermostat…
Bituminous primer made with blown bitumen and pure fast-drying solvents. POLYPRIMER HP 45 PROFESSIONAL is used as a primer for concrete surfaces, to stop dusting, allowing traditional or…
Bituminous primer made with blown bitumen and pure fast-drying solvents. …
Cold flexibility: -25°C POLYVAP SA P-AL is a top-quality prefabricated SELF-ADHESIVE bitumen membrane produced using ADESO® technology, the new ELASTOMERIC (SBS) compound laminating system developed…
Cold flexibility: -25°C POLYVAP SA P-AL is a top-quality prefabricated…
TECHNICAL DATA: Consistency: creamy. Waiting time between each coat: 5-6 hours at +23°C. Colour: white. Consumption: 2.5 kg/m² corresponds to a dry coat approx. 2 mm thick. Storage: 12 months.…
TECHNICAL DATA: Consistency: creamy. Waiting time between each coat: 5-6 hours…
Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It is easy to apply with a spatula or by brush and gives off very little odour. Pulicol 2000 has high detachment capacity on…
Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water. Waiting time before applying other products:…
TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…
One-component, solvent-free, (according to TRGS 610) sililated polymer-based adhesive with a very low emission level of volatile organic compounds (EMICODE EC1 Plus), for all types of parquet. Where…
One-component, solvent-free, (according to TRGS 610) sililated polymer-based…
High-performance polyurethane-cement mortar developed by MAPEI’s Research Laboratories, trowel-applied in 6, 9 or 12 mm, for the protection of industrial floors, non-slip, antimicrobial and easy to…
High-performance polyurethane-cement mortar developed by MAPEI’s Research…
ADVANTAGES: Increased compressive strength Neutral setting characteristics Optimised for power float flooring Enhanced air content control Suitable for use with either ready mixed concrete or site…
TECHNICALDATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315 %.…
TECHNICALDATA: Type of material: rubber sandwiched between two layers of…
Structural strengthening system consisting of pultruded plates In high-strength carbon fibre and epoxy resins to bond the Plates (frp) covered by certificate of technical assessment (cvt) N°…
Structural strengthening system consisting of pultruded plates In high-strength…
Single component hydro-expansive paste supplied in cartridges, used to waterproof and seal cracks in concrete. Where to use: Mapeproof Swell has been specially developed to form flexible, waterproof…
Single component hydro-expansive paste supplied in cartridges, used to…
Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…
Three component epoxy-cement based special primer. Can be used on absorbent and…
