MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive paste for galvanic cathodic protection of reinforcement rods against corrosion in new structures or structures…
MAPESHIELD I are multilayer pure zinc anodes coupled with a special conductive…
Where to use: Mapelastic 2KR Plus can be used as a waterproofer under tile and slab coverings, according to PG AIV. Mapelastic 2KR Plus can be used as a crack-bridging protective coating for concrete…
Where to use: Mapelastic 2KR Plus can be used as a waterproofer under tile and…
With PP level GRID safety system, installing ceramic tiles and/or stone slabs of different formats and in different directions will no longer be a problem. In fact, this tool for the installation of…
With PP level GRID safety system, installing ceramic tiles and/or stone slabs…
Where to use: Thanks to its unique formulation, concrete which is produced using Dynamon EW 460 will have extended
consistence retention performance when producing high quality concrete from…
Where to use: Thanks to its unique formulation, concrete which is produced…
Where to use: MapeWall GPR Zero is suitable for rendering and levelling internal and external masonry substrates, in
thicknesses up to 15 mm per layer, up to an overall maximum thickness of 40 mm.…
Where to use: MapeWall GPR Zero is suitable for rendering and levelling…
Where to use: Repairing damaged concrete surfaces in overhead, vertical and horizontal situations, where a medium
strength high build mortar is required. Application examples: ▪ Repair of damaged…
Where to use: Repairing damaged concrete surfaces in overhead, vertical and…
Where to use: Bonding to cement-based and suitably prepared calcium sulphate based screeds, concrete, existing
unglazed ceramic floor tiles, cement-based renders, gypsum plaster, plasterboard,…
Where to use: Bonding to cement-based and suitably prepared calcium sulphate…
Where to use: Recommended for grouting voids in structural elements such as: filling gaps in precast elements, a
grouting base plates and bridge bearings.
Some application examples ▪ Anchoring of…
Where to use: Recommended for grouting voids in structural elements such as:…
Special high performance, deformable, non-slip grey and white adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with offset Greenhouse Gas…
Special high performance, deformable, non-slip grey and white adhesive with…
PLANITOP 210 ZERO is a natural fine finish skim coat for levelling and finishing masonry and concrete walls, cementitious and lime-cement render, old quartz paints, scratched plastic, inside and…
PLANITOP 210 ZERO is a natural fine finish skim coat for levelling and…
Where to use: For instant stopping of water leaks, even water under pressure. Some application examples: Stopping water leaks in basements, subways and below grade structures in general. Stopping…
Where to use: For instant stopping of water leaks, even water under pressure.…
One-component acrylic formulation in water dispersion used as a base coat before applying protective finishes on Ultratop, Ultratop Living and Ultratop Loft
One-component acrylic formulation in water dispersion used as a base coat…
ULTRACARE FINISH OPACA is an anti-wear liquid wax with a matt finish , ideal for terracotta, stone, marble (unpolished), recomposed and similar floors in indoor or covered exteriors. ULTRACARE FINISH…
ULTRACARE FINISH OPACA is an anti-wear liquid wax with a matt finish , ideal…
ULTRACARE FINISH LUCIDA is an anti-wear liquid wax with a glossy finish Ideal for terracotta, stone, marble (unpolished), recomposed and similar floors in indoor or covered exteriors. ULTRACARE…
ULTRACARE FINISH LUCIDA is an anti-wear liquid wax with a glossy finish Ideal…
POLIESTERE 60 is a white staple-fibre, needle-punched, calendared nonwoven fabric with a mass of 60 g/m2, made using no adhesives, chemical binders or recycled material, heat set on one side and used…
POLIESTERE 60 is a white staple-fibre, needle-punched, calendared nonwoven…
High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…
High-protection, thick-layered acrylic coating product with high filling…
MapeCube 60W is a liquid mechanical strength enhancer with fluidifying effect.
MapeCube 60W, by optimising the hydration of cement phases, increases the mechanical strength of concrete and mortar at…
MapeCube 60W is a liquid mechanical strength enhancer with fluidifying…
