Where to use: Mapefloor CPU+/Primer is normally used as primer for the surface saturation of particularly porous substrates
in combination with Mapefloor CPU+/MF, /HD, /RT, /NZ, /UD, /SR, /DP,…
Where to use: Mapefloor CPU+/Primer is normally used as primer for the surface…
Where to use: Mapefloor CPU+/UD is mainly used to create polyurethane-cement based systems with a no-slip surface
profile, for industrial floors especially in dry or wet production and logistic…
Where to use: Mapefloor CPU+/UD is mainly used to create polyurethane-cement…
Self-adhesive bitumen membrane suitable for application at low temperatures up to +5°C for waterproofing underground structures and roofs Where to use: Mapethene LT AP is used to waterproof the…
Self-adhesive bitumen membrane suitable for application at low temperatures up…
Indoor and outdoor crack-bridging, anti-carbonation elastomeric paint, resistant to moulds and algae, with offset CO 2 emissions through the entire life cycle
Indoor and outdoor crack-bridging, anti-carbonation elastomeric paint,…
Indoor and outdoor water-repellent, breathable silicone-base paint, resistant to moulds and algae, with offset CO 2 emissions through the entire life cycle
Indoor and outdoor water-repellent, breathable silicone-base paint, resistant…
Where to use: Mapeplast N44 is designed to work in concrete with consistency classes S2 to S4. Concrete which is produced
using Mapeplast N44 is easy to lay when fresh, and has high performance…
Where to use: Mapeplast N44 is designed to work in concrete with consistency…
Where to use: Mapebent CBS4 is suitable to be used in every field of civil engineering, in particular when it is necessary to
obtain a quick activation of the bentonite in water and when the mix…
Where to use: Mapebent CBS4 is suitable to be used in every field of civil…
Where to use: Dynamon NRG 1054 is strongly recommended in pre-cast concrete plants, especially for the production of
concrete elements such as: pipes & manholes pre-stressed beams; infill wall…
Where to use: Dynamon NRG 1054 is strongly recommended in pre-cast concrete…
Where to use: For interior and exterior installations of ceramic, porcelain and moisture stable natural stone tiles and mosaics to cement-based and suitably prepared calcium sulphate based screeds,…
Where to use: For interior and exterior installations of ceramic, porcelain and…
Idrostop B25 N is a water-stop material, composed of a mix of sodium bentonite & butyl rubber which reacts with water to seal construction joints within concrete. The seal resists hydro-static…
Idrostop B25 N is a water-stop material, composed of a mix of sodium bentonite…
Mapeproof HW N is an active waterproofing membrane of high-strength geotextiles encapsulating a layer of sodium bentonite. It consists of two geo fabrics, a non-woven & woven geotextile which are…
Mapeproof HW N is an active waterproofing membrane of high-strength geotextiles…
Where to use: Grouting all types of external paved floors (porcelain slabs, cement-based composites, porphyry slabs and blocks, etc.) subject to light traffic (vehicles up to 3.5 tonnes). Some…
Where to use: Grouting all types of external paved floors (porcelain slabs,…
Preparation of the product : Mix a 25 kg bag of MapePave Mortar with 1.55-1.8 litres of water for at least 5 minutes in a cement mixer, automatic pressure pump or truck mixer until a homogeneous mix…
Preparation of the product : Mix a 25 kg bag of MapePave Mortar with 1.55-1.8…
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres of water for at least 5 minutes with a Mechanical mixer and paddle. The mix must be applied to the MapePave Mortar fresh…
Preparation of the product: Mix a 20 kg bag of MapePave Slurry with 6.4 litres…
ADEPURMONO is a permanently elastic, easily expanding, moisture-setting 1-part polyurethane adhesive offering high adhesion. ADEPUR MONO is a product designed for application on concrete slabs,…
ADEPURMONO is a permanently elastic, easily expanding, moisture-setting 1-part…