Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and cementitious adhesives,…
Multi-purpose, ready-to-use, low odour, bonding promoter primer with a very low…
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds. TECHNICAL…
One-component, solvent-free, moisture curing polyurethane primer with a very…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and joints and carrying out small repairs. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Mixing ratio (in…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
Fine-grained, ultra quick-drying, thixotropic smoothing compound for: – repairs up to 25 mm; – laying of resilient coverings after 1 hour. TECHNICAL DATA: Where to use: internal floors and walls for…
Structural R4-class, rapid-setting, shrinkage-compensated, thixotropic, fibre-reinforced, cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete
Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum…