Two-component, water-based epoxy coating for concrete floors and cementitious substrates and as a finishing compound for epoxy systems, to provide an anti-dust and oil resistant finishing treatment with shiny effect. Mapecoat I 620 W is used as an anti-dust and anti-oil layer on concrete, which must be previously primed with Triblock P as finishing compound for Ultratop, or on epoxy systems. The two components which make up Mapecoat I 620 W must be mixed together using a low-speed drill with a mixer attachment, until a homogenous blend is obtained. While mixing, add 10% in weight of Mapecolor Paste and from 10-20% of water and continue mixing until a homogenous mix is obtained. Apply the product in an even layer using a short-haired or medium-haired roller or an airless spray gun. To leave the surface with a non-slip finish, add from 5 to 10% in weight of Mapefloor Filler to Mapecoat I 620 W, according to the level of non-slip effect required.
Consumption 0.100-0.250 kg/m2, according to the absorbency of the substrate.
Packaging 15 kg kits: component A = 5 kg; component B = 10 kg.