Self-levelling, ultra-quick setting mortar with special hydraulic binders, applied at a thickness between 5 and 15 mm to create abrasion-resistant internal floors TECHNICAL DATA: Colour: white, light…
Self-levelling, ultra-quick setting mortar with special hydraulic binders,…
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…
Adhesive with high rapid tack for laying textile and linoleum flooring. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-20 minutes. Open time: 20-30 minutes. Set to…
Adhesive with high rapid tack for laying textile and linoleum flooring.…
Three-component polyurethane/cement-based formulate for coating walls and as a finishing coat on polyurethane/cementitious systems for industrial floors. TECHNICAL DATA: Mixing ratio: A/B/C =…
Three-component polyurethane/cement-based formulate for coating walls and as a…
Three-component polyurethane/ cement-based mortar for making covings and details. TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of MAPECOLOR PASTE. Colour of mix:…
Three-component polyurethane/ cement-based mortar for making covings and…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0…
Special quick-setting and drying (24 hours), controlled-shrinkage hydraulic…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and joints and carrying out small repairs. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Mixing ratio (in…
Two-component rapid-hardening silicate-urethane resin for sealing cracks and…
Solvent-free contact adhesive for resilient and textile floor and wall coverings. ULTRABOND ECO CONTACT is a contact adhesive which has to be applied on both the substrate and the back of the…
Solvent-free contact adhesive for resilient and textile floor and wall…
Fibre-reinforced LVT adhesive. Specifically developed for the installation of LVT floorings, it guarantees the highest performances in terms of adhesion and dimensional stability. TECHNICAL DATA:…
Fibre-reinforced LVT adhesive. Specifically developed for the installation of…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus of elasticity for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…
Rapid-hardening paintable polyurethane sealant and adhesive with a high modulus…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic waterproofing systems. TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm.…
Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic…
Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…
Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…
Agent for injection, composed of concentrated silicone micro-emulsion for creating a chemical barrier against rising damp in the masonry. Mapestop is used to form a chemical barrier against rising…
Agent for injection, composed of concentrated silicone micro-emulsion for…
Light grey, rapid setting, fine mortar for repairing and smoothing concrete and renders. Planitop 100 is used for localized repairs of precast concrete elements damaged by movement and for adjusting…
Light grey, rapid setting, fine mortar for repairing and smoothing concrete and…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…
Synthetic resin based primer in water dispersion. Applications: Treating gypsum…
One-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready-to-use solvent-free one-component MS polymer based adhesive. On extrusion, it is a thixotropic paste suitable for…
One-component adhesive for the installation of Idrostop. Idrostop Mastic is a…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid membranes. Applications: Flexible waterproofing of expansion joints of terraces, balconies, etc. and of wall…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…
Special fast setting hydraulic binder for the preparation of normal setting and…