Project Puskas Arena, Budapest


Yard	New building
Location	Budapest, Hungary
Subcategory	STADIUM
Application	Industrial floor, waterproofing, concrete repair, ceramic installation
Start and finish date	2017/2019
Application Type	New building
Contractor company	Magyar Építő Zrt., ZÁÉV Zrt., Épkar Zrt., WHB Ltd.
Installer companies	Spectech Ltd., Akvaszig Ltd., Tipox Betontechnika Ltd., Stukkó Ltd., Ratskó Bau Ltd., Dominó Ltd.
Architects	György Skardeli
MAPEI Distributor	BNF Áruház, Csorna
MAPEI Coordination	Gergely Garay, István Jankovits, Ervin Horváth, Zsolt Marton, Zsolt Dunai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 30 minutes.…

High-performance cementitious adhesive with no vertical slip and extended open…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…

Osmotic cementitious mortar suitable for contact with drinking water for…

KERACOLOR FF

High-performance, polymer-modified, water-repellent, cementitious grout with DropEffect® technology for joints up to 6 mm

High-performance, polymer-modified, water-repellent, cementitious grout with…

MAPEBAND

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -20°C to +60°C. Packaging: – 50 m rolls of 120…

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…