Project Leksandhallen , Leksand


Yard	Leksandhallen
Location	Leksand, Sweden
Subcategory	SWIMMING POOL
Built in	2012
Opened in	2012
Application	Leksandhallen
Start and finish date	2011/2012
Application Type	Waterproofing
Client	Leksand kommun
Installer companies	Kakelgruvan i borlänge ab
Architects	Sweco Architects AB / Rolf Englund
MAPEI Distributor	Modena ab
Project Manager	Alf Engström
Other	Originally built in 1970 the public bath is renovated. Conctere structure and ceramics

ISOLASTIC

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

MAPEBAND

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems and liquid membrane. TECHNICAL DATA: In service temperature range: from -20°C to +60°C. Packaging: – 50 m rolls of 120…

Rubber tape with alkali-resistant fabric for cementitious waterproofing systems…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds.

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…