Project Complexe Courcellor, Levallois-Perret

Complexe Courcellor

Levallois-Perret, France

Ref #: 6068

Category: COMMERCIAL

Construction


Yard	Complexe Courcellor II
Location	Levallois-Perret, France
Subcategory	MALL
Application	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
Start and finish date	2011/2012
Application Type	Floor/wall covering
Client	Semalrep, Nexity
Architects	Calq Architecture, Epstein et Glaiman, Recevki Architecture
MAPEI Distributor	Triomat
Credits	Stéphane Lévy, JM Giraudeaux

Product used for the project

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approximately 1 hour.…

Osmotic cementitious mortar suitable for contact with drinking water for…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds.

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…