Yes, with these limitations: Use MAPEI adhesive Ultrabond ECO 350, Ultrabond ECO 360, Ultrabond ECO 373 or Ultrabond ECO 399. Also, follow MAPEI’s Technical Data Sheet instructions and use a 1/32" U-notch trowel. Finally, expect 60 to 90 minutes of flash time before installing the LVP/LVT.
Mapeguard UM is approved for exterior applications with some limitations; please consult the Technical Data Sheet for details. Mapeguard UM 35 is not approved for exterior applications.
Yes, with these limitations: Tile must be installed per installation standards published in the most current TCNA Handbook, ANSI 108 specification. If the OSB is weather-beaten or delaminated, it must be properly overlaid with a cement backer unit or an additional layer of subfloor.
Yes, with these limitations: Tile must be installed per installation standards published in the most current TCNA Handbook, ANSI 108 specification. And if the OSB is weather-beaten or delaminated, it must be properly overlaid with a cement backer unit or an additional layer of subfloor.
For sound reduction, crack isolation, waterproofing and vapor management. If using Mapeguard 2 for vapor management, do not use MAPEI SM Primer or MAPEI SM Primer Fast, instead use MAPEI HM Primer. BB Tape
Do not use on shower floors or in submerged applications or floors subject to standing water