Project detail


Yard	Zateplovací systém, Hydroizolácia, Inštalácia obkladov, dlažieb a mozaiky
Location	Bratislava, Slovakia
Subcategory	RESIDENCE
Built in	2008
Opened in	2010
Application	Zateplovací systém, Hydroizolácia, Inštalácia obkladov, dlažieb a mozaiky
Application Type	New building
Client	DOAS, a.s.
Contractor company	DOAS, a.s.
Installer companies	A-keramika, a.s.
MAPEI Distributor	MAPEI SK, s.r.o.

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…

Two-component, rapid-setting thixotropic adhesive for structural bonds. …

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

ISOLASTIC

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending on the trowel used. Packaging: 5, 10, 25 kg drums. Storage: 24 months in its original packaging.

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending…

KERABOND T

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…

Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERALASTIC

Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic:…

Two-component, high-performance polyurethane adhesive for ceramic tiles and…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFLEX PU40

Paintable polyurethane sealant with a low modulus of elasticity for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.24 N/mm². Shore A…

Paintable polyurethane sealant with a low modulus of elasticity for movements…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGROUT THIXOTROPIC

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

SILANCOLOR BASE COAT

Water-repellent, coloured acrylic undercoat with a smooth finish and good filling properties for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Water-repellent, coloured acrylic undercoat with a smooth finish and good…

Transpirant, water-repellent, thick-layered siloxane coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm…

Transpirant, water-repellent, thick-layered siloxane coating product with high…