Quick-hardening cementitious levelling compound for internal and external surfaces. TECHNICAL DATA: Where to use: on floors for ceramic and natural stone coatings. Workability time: more than 60…
Quick-hardening cementitious levelling compound for internal and external…
Two-component, rapid-setting thixotropic adhesive for
structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…
Two-component, rapid-setting thixotropic adhesive for
structural bonds. …
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before…
Cementitious adhesive with no vertical slip for ceramic tiles (thickness of…
High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…
High-performance, deformable cementitious adhesive with no vertical slip,…
Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic:…
Two-component, high-performance polyurethane adhesive for ceramic tiles and…
Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to…
Two-component, high-performance polyurethane adhesive with no vertical slip for…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 1 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an…
Two-component epoxy grout, easy to apply and excellent cleanability, with a…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…
Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…
One-component, high-performance, highly-deformable, lightweight cementitious adhesive with extended open time, very high yield, easy to trowel and good buttering capacity, for ceramic tiles and…