Project ISP Nebušice, Nebušice


Yard	ISP Nebušice
Location	Nebušice, Czech Republic
Subcategory	SCHOOL
Opened in	2010
Application	ISP Nebušice
Application Type	Floor/wall covering

ADESILEX G19

Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…

Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…

ADESILEX G20

Low viscosity, two-component epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Particularly suitable for installing thin…

Low viscosity, two-component epoxy-polyurethane adhesive for resilient and…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

Two-component, quick-hardening polyester resin for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: grey; comp. B: white.…

Two-component, quick-hardening polyester resin for monolithic sealing cracked…

$LATEX PLUS$

LATEX PLUS

Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with LATEX PLUS it forms a high-performance, quick-setting, highly-deformable adhesive (C2F/S2). TECHNICAL DATA OF LATEX PLUS +…

Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECRYL ECO

Acrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: creamy paste. Colour: light beige.…

Acrylic adhesive in water dispersion for vinyl and textile floors with very low…

MAPELAY

PVC waterproofing and isolating sheet reinforced with glass fibres, for laying internal resilient and fabric floors on substrates which have cracks, which are particularly dirty or damp or which are…

PVC waterproofing and isolating sheet reinforced with glass fibres, for laying…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVORAPID

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…

Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…

PLANIPATCH

Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls…

Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³):…

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio:…

PULICOL

Solvent gel to remove adhesives and paint. Where to use: - Removal of old natural and synthetic resin based adhesives and paint. - Cleaning old adhesives from marble and ceramic flooring, levelling…

Solvent gel to remove adhesives and paint. Where to use: - Removal of old…

ULTRABOND ECO FIX

Adhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles. TECHNICAL DATA: Consistency: creamy…

Adhesive in water dispersion which remains permanently tacky with very low…

ULTRABOND ECO V4SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRAPLAN ECO

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Where to use: internal…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…