Project Complexe Courcellor, Levallois-Perret


Yard	Complexe Courcellor II
Location	Levallois-Perret, France
Subcategory	MALL
Application	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
Start and finish date	2011/2012
Application Type	Floor/wall covering
Client	Semalrep, Nexity
Architects	Calq Architecture, Epstein et Glaiman, Recevki Architecture
MAPEI Distributor	Triomat
Credits	Stéphane Lévy, JM Giraudeaux

CARBOPLATE

Pultruded carbon fibre plate with a protective plastic film on both faces. TECHNICAL DATA: Modulus of elasticity: 170 - 200 - 250 GPa. Fibre content: 68% - 68% - 65%. Thickness: 1.4 mm. Width: 50,…

Pultruded carbon fibre plate with a protective plastic film on both faces.…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

EPORIP

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked screeds. TECHNICAL DATA: Consistency: comp. A: fluid paste; comp. B: fluid paste. Colours: comp. A: black; comp. B: white.…

Two-component, solvent-free epoxy adhesive for monolithic sealing cracked…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEWRAP 11

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete surfaces and for structural bonding. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 35…

Two-component, normal-setting, thixotropic epoxy grout for evening out concrete…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP C UNI-AX

High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity. TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥…

High-strength, unidirectional carbon fibre fabric with a high modulus of…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP 400

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…

Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRAPLAN MAXI

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 40 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…

Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…