Project Baseny Mineralne, Solec Zdrój


Yard	spa
Location	Solec Zdrój, Poland
Subcategory	SWIMMING POOL
Built in	2012
Opened in	2012
Application	waterproofing and ceramic installation
Application Type	Waterproofing
Installer companies	Fliz-Kom Mirosław Saczka
Project Manager	Piotr Kuglin, Mariusz Żmudka, Grzegorz Batko, Filip Stefański

ADESILEX P10

High-performance, white cementitious adhesive with no vertical slip and extended open time for glass mosaic, ceramic and marble coatings (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life…

High-performance, white cementitious adhesive with no vertical slip and…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

ISOLASTIC

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending on the trowel used. Packaging: 5, 10, 25 kg drums. Storage: 24 months in its original packaging.

Elasticizing latex for cement-based adhesives. Consumption: 1-2 kg/m2 depending…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 1 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Colour of mix: white, grey (Ral 7001) and neutral. Application…

Two-component epoxy paint for anti-acid coatings on concrete surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; –…

Synthetic rubber latex to improve adhesion of cement mixes. TECHNICAL DATA:…

PULICOL 2000

Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel. Colour: transparent. Inflammable: yes. Application temperature range: from +10°C to +35°C. Removal time: – adhesives in…

Solvent gel for removing adhesive and paint. TECHNICAL DATA: Consistency: gel.…