Project Aquaticum Debrecen Spa, Debrecen


Yard	Installation of ceramic tiles and waterproofing in pools, resilient installation work on the stairs, MAPECOAT TNS URBAN near the pool.
Location	Debrecen, Hungary
Subcategory	Spa
Application	Installation of ceramic tiles, waterproofing, resilient line.
Start and finish date	2019/2020
Application Type	Solutions for sports flooring, Waterproofing
Client	Debrecen City Council
Contractor company	Hunép Zrt.
MAPEI Distributor	GSV Kft.
Credits	Mário Bere
MAPEI Coordination	Krisztián Szénás

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials.

High-performance cementitious adhesive with no vertical slip and extended open…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…

Two-component, rapid-setting thixotropic adhesive for structural bonds. …

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPECOAT I 620 W

Two-component, shiny epoxy finish in water dispersion for anti-dust and anti-grease treatments on concrete floors, cementitious substrates and as a finishing coat on epoxy systems. TECHNICAL DATA:…

Two-component, shiny epoxy finish in water dispersion for anti-dust and…

MAPEFLEX MS45

Paintable hybrid sealant and adhesive with a high modulus of elasticity also for wet substrates, for movements up to 20%. TECHNICAL DATA: Movement in service: 20%. Modulus of elasticity at 100%…

Paintable hybrid sealant and adhesive with a high modulus of elasticity also…

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MONOLASTIC

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of mix: plastic-trowable. Dry solids content: 100%. Classification: EN 14891. Storage: 12 months. Mixing water: 27-29%.…

One-component cementitious waterproofing mortar. TECHNICAL DATA: Consistency of…

PLASTIMUL 2K PLUS

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres. TECHNICAL DATA: Consistency: paste Density: 1.1 g/cm³. pH: 10.…

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility…

PRIMER SN

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³):…

Two-component epoxy primer with fillers. TECHNICAL DATA: Mixing ratio:…

TRIBLOCK P

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…