Project Aquanor, Sainte-Clotilde

Aquanor

Sainte-Clotilde, France

Ref #: 5816

Category: SPORT FACILITIES

Construction


Yard	outdoor swimming-pools
Location	Sainte-Clotilde, France
Subcategory	SWIMMING POOL
Built in	2013
Opened in	2016
Application	supply of products for waterproofing and ceramic installation
Start and finish date	2013/2016
Application Type	Waterproofing
MAPEI Distributor	Omniplast
Project Manager	SBTPC

Product used for the project

ADESILEX PG2

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable…

Two-component, rapid-setting thixotropic adhesive for structural bonds. …

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 1 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAPOXY CQ

Two-component epoxy grout, easy to apply and excellent cleanability, with a bacteriostatic agent and BioBlock ® technology, ideal for grouting ceramic tiles and mosaics. Can also be used as an…

Two-component epoxy grout, easy to apply and excellent cleanability, with a…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of…

TPE tape for flexible sealing and waterproofing of expansion joints and cracks…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL…

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…