Project Route 2020, Dubai


Yard	Tunnels and stations
Location	Dubai, United Arab Emirates
Subcategory	TUNNEL
Application	Supply of products for underground construction and ceramic installation
Application Type	Products for underground construction (utt)

1.2 Quartz

Spherical, grey, alluvium quartz for the Mapefloor Systems and Triblock P. Quartz 0.25 Selected, graded blend of grey, alluvium quartz with a trigonal crystalline structure and a maximum inert size…

Spherical, grey, alluvium quartz for the Mapefloor Systems and Triblock P.…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and hydrating cementitious adhesive for ceramic tiles and stone materials. TECHNICAL DATA: Consistency: comp. A: powder; comp. B: thick…

Two-component, high-performance, deformable, quick-setting and hydrating…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…

One-component cementitious mortar for bonding and levelling insulation panels…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

RESFOAM 1 KM FLEX

Ultra-fluid, flexible one-component polyurethane injection resin for waterproofing structures

Ultra-fluid, flexible one-component polyurethane injection resin for…

TOPCEM

Special fast setting hydraulic binder for the preparation of normal setting and fast drying (4 days) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on…

Special fast setting hydraulic binder for the preparation of normal setting and…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…