Two-component, epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Specifically developed for the installation of rubber…
Two-component, epoxy-polyurethane adhesive for resilient and textile flooring…
Low viscosity, two-component epoxy-polyurethane adhesive for resilient and textile flooring on internal and external absorbent and non-absorbent substrates. Particularly suitable for installing thin…
Low viscosity, two-component epoxy-polyurethane adhesive for resilient and…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…
Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…
Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with LATEX PLUS it forms a high-performance, quick-setting, highly-deformable adhesive (C2F/S2). TECHNICAL DATA OF LATEX PLUS +…
Elasticising latex mixed with KERAQUICK S1. When KERAQUICK S1 is mixed with…
Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…
Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: creamy paste. Colour: light beige.…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low…
Alkali-resistant, primed glass fibre mesh for structural “reinforced” strengthening of stone, brick and tuff substrates. TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…
Alkali-resistant, primed glass fibre mesh for structural “reinforced”…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic,…
Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from…
Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls…
Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…
Synthetic resin primer in water dispersion with a very low content of volatile…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…
Multi-purpose, acrylic adhesive in water dispersion with a long open time and…
Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA: Consistency:…
Light-coloured adhesive in water dispersion with very low emission level of…