Project Family house, Pécs, Pécs


Yard	Installation of ceramic tiles indoors, on a facade and on a terrace. Thermal insulation.
Location	Pécs, Hungary
Subcategory	HOUSE
Application	Installation of ceramic tiles, waterproofing, thermal insulation.
Start and finish date	2016/2018
Application Type	Floor/wall coverings, Waterproofing systems
Contractor company	Ofsys Ltd.
Installer companies	Ofsys Ltd.
Architects	Gábor Kerfélessy
MAPEI Distributor	Bau Systeme 92 Kft.
MAPEI Coordination	László Takács

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

KERANET

Acid-based cleaner for ceramic tiling. Particularly suitable for removing efflorescent salt and the final cleaning of terracotta. As a powder concentrated) or liquid (15% water solution).…

Acid-based cleaner for ceramic tiling. Particularly suitable for removing…

MAPECRETE STAIN PROTECTION

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and cementitious surfaces made from modified organic polymers in water solution. TECHNICAL DATA: Application temperature…

Hydro-oil repellent and anti-stain treatment for concrete, natural stone and…

Two-component, aliphatic, transparent polyurethane finish for absorbent surfaces. TECHNICAL DATA: Mixing ratio: comp A: comp. B = 4.9 : 5.1. Colour of mix: transparent. Consistency of mix: fluid. Dry…

Two-component, aliphatic, transparent polyurethane finish for absorbent…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…