Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…
Water-based acrylic undercoat and bonding promoter with a smooth finish.…
Two-component free-flowing elastic polyurethane sealant with a low modulus of elasticity, for joints with movements up to 25% with low modulus of elasticity, resistant to hydrocarbons. TECHNICAL…
Two-component free-flowing elastic polyurethane sealant with a low modulus of…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in one multiextrusion coating process, with high quality raw materials, reinforced with glass mat. Mapeplan® B is conform…
Mapeplan® B is a synthetic roofing waterproofing membrane in PVC-P produced in…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…
One-component, ultra-fluid polyurethane resin applied by injection for…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress Where to use –…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to…
Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…
Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…
Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…
Surface treatment in liquid form made from lithium silicate with a…
Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…
Pre-blended, ready-to-use industrial hardener for concrete floors made from…
One-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: no. Application…
One-component, solvent-free primer for polyurethane sealants, for use on…
Water-repellent cementitious skimming mortar with a medium-textured, natural finish for concrete and plastic, glass and porcelain coverings. TECHNICAL DATA: Maximum dimension of aggregate: 0.7 mm.…
Water-repellent cementitious skimming mortar with a medium-textured, natural…
One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…
One-component cementitious mortar with high bonding strength for interior and…
One-component, large-grained cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey and white Density of…
One-component, large-grained cementitious mortar for bonding and levelling…
One-component cementitious mortar for bonding and levelling insulation panels and for thermal insulation systems. TECHNICAL DATA: Consistency: powder. Colour: grey. Density of the mix (kg/m³): 1,450.…
One-component cementitious mortar for bonding and levelling insulation panels…
