Mapeplast R18 SP is a water solution of active polymers that retard cement hydration and limit slump loss in concrete during hot weather and when transporting over long distances. Retention of…
Mapeplast R18 SP is a water solution of active polymers that retard cement…
Ideal for structural
repairs and skimming internal and external , horizontal and vertical concrete
surface s even in permanent contact with water. Thanks to its particular formulation the product…
Ideal for structural
repairs and skimming internal and external , horizontal…
MAPEFER 1K ZERO is a one-component mortar made from cementitious binders, powdered polymers and corrosion inhibitors and is applied to steel reinforcement to prevent the formation of rust and as an…
MAPEFER 1K ZERO is a one-component mortar made from cementitious binders,…
Special high performance, deformable, non-slip grey adhesive with extended open time, Low Dust technology, very low emission of volatile organic compounds and with offset Greenhouse Gas emissions for…
Special high performance, deformable, non-slip grey adhesive with extended open…
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: powder.…
One-component trowellable coarse-textured cementitious paste applied in layers…
Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry. TECHNICAL DATA: Consistency of…
Two-component rapid-drying elastic cementitious mortar for waterproofing…
Super-fluid, salt-resistant, hydraulic binder with fillers made from lime and ECO-POZZOLAN applied by injection for consolidating masonry and render, including the frescoed ones. TECHNICAL DATA:…
Super-fluid, salt-resistant, hydraulic binder with fillers made from lime and…
MULTI-LAYERED, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT COMPLIANT WITH THE REQUIREMENTS OF CLASS OS 8 (EN 1504-2) FOR COATING ROAD SURFACES IN CAR PARKS SUBJECTED TO LIGHT TO MEDIUM TRAFFIC.…
MULTI-LAYERED, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT COMPLIANT WITH…
MULTI-LAYERED, SEAMLESS, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT COMPLIANT WITH THE REQUIREMENTS OF CLASS OS 8 (EN 1504-2) FOR COATING ROAD SURFACES IN CAR PARKS SUBJECTED TO HIGH VOLUMES OF…
MULTI-LAYERED, SEAMLESS, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT…
Two-component ready-mixed high-ductility fibre-reinforced natural hydraulic lime (NHL) and Eco-Pozzolan mortar, particularly recommended for levelling off the surface of stone, bricks and tuff, and…
Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…
Pre-blended, high-performance polymer-modified cementitious mortar for grouting…
Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2…
One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. TECHNICAL DATA: Consistency: fine powder.…
One-component trowellable fine-textured cementitious paste applied in layers up…
_65a6d59109094403b7c6133efec7d3f5.png?sfvrsn=58354810_0)
