Rapid-Setting, “All-in-One” Grout Replacement for Sanded and Unsanded Grouts
Ultracolor Plus FA – with DropEffect technology and CO2 emissions fully offset in the product's life cycle – is an ultra premium, fine-aggregate, fast-setting, polymer-modified, color-consistent, nonshrinking, efflorescence-free grout for joint widths from 1/16" to 3/4" (1.5 to 19 mm). DropEffect reduces surface absorption. to help repel water, dirt and grime from penetrating grout joints. Ultracolor Plus FA is specially formulated with MAPEI’s High-Hydrated Cement Technology (HCT) to eliminate common problems such as color consistency and efflorescence. Along with offering higher polymer content, HCT reduces absorption and increases stain resistance when compared with standard-performance cement grouts.
Brochures
Brochures
Brochures
Technical documentation
Brochures, Technical documentation
Technical documentation
Technical documentation
Brochures
Products identified with MAPEI's BioBlock logo have been developed in such a way that they do not support mold/mildew/fungi growth after product installation, as certified by external laboratories per industry standard ASTM G21: Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi. Common cleaning and maintenance practices are still needed.
For homeowners and building owners, the advantage is after installation. MAPEI’s BioBlock products will not support the growth of mold/mildew/fungi – with adequate cleaning and maintenance practices.
The advantage for contractors and installers is that MAPEI’s BioBlock products do not support the growth of mold/mildew/fungi – with adequate cleaning and maintenance. Therefore, their use can increase the life of an installation, resulting in fewer callbacks for installers and contractors.
Since the introduction of the BioBlock logo in 2003, MAPEI has continued to develop and expand the range and depth of products that include this technology. The list of MAPEI products that carry the BioBlock logo is evolving with the technology and is constantly growing. Look for these innovative products across the following categories: Liquid membranes, adhesives, sealants, caulks, mortars, grouts and finishes.
ASTM G21 is an industry standard that uses an intensive testing protocol for determining if fungi, including mold and mildew, can grow on a polymeric material. MAPEI uses a third-party lab and the ASTM G21 standard for testing the antifungal effectiveness of MAPEI products containing polymer that incorporate BioBlock technology. The ASTM G21 test uses a mix of mold and mildew spores that are commonly found in household environments. Product samples are placed on nutrient-containing plates and sprayed with a mixture of these fungi. For 28 days, the test plates are kept at a constant temperature of 84.2°F (29°C) and exposed to high humidity, which are excellent conditions for fungal growth. The samples are then examined for fungal growth. If no growth is present, the product is considered to not support mold/mildew/fungal growth.
Keep in touchSubscribe to our newsletter to get Mapei news
Technical Data Sheet
