Project Sándor- Metternich Castle, Bajna


Yard	Facade maintenance for outbuildings with POROMAP SYSTEM on 1500 square meters, waterproofing.
Location	Bajna, Hungary
Subcategory	CASTLE
Application	Facade maintenance, waterproofng.
Start and finish date	2018/2021
Application Type	Concrete restoration systems, Masonry restoration, Waterproofing systems
Contractor company	Pharos ’95 Kft.
Installer companies	Pharos ’95 Kft.
Architects	Zoltán Erő, Palatinum Stúdió
MAPEI Distributor	Mapei Kft., Budaörs
Credits	Mário Bere
MAPEI Coordination	Zsolt Lakatos

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

KERALASTIC T

TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic: approx. 12 hours. Ready for use: approx. 7 days. Deformability: highly deformable. Colours:…

TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours.…

MAPEBAND EASY

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…

MAPECOAT I 600 W - Primer

DESCRIPTION: Two-component transparent epoxy primer in water dispersion. TECHNICAL DATA: Consistency of mix: fluid. Colour of mix: opaline. Mixing ratio: comp. A: comp. B = 2.3 : 3.6. Workability…

DESCRIPTION: Two-component transparent epoxy primer in water dispersion.…

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C FIOCCO

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of…

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid…

MAPEWRAP G FIOCCO

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP FAST 330 - Levelling Mortar

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for…

PLASTIMUL PRIMER

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range.

Solvent-free, bitumen primer for treating substrates before applying…

POLYPRIMER

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is used as a primer for concrete surfaces, to stop dusting and saturate their porosity, allowing traditional or…

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…