Project San Pietro Villa, Margigliano

San Pietro Villa

Margigliano, Italy

Ref #: 4277

Category: SPORT FACILITIES

Construction


Yard	New swimming-pool
Location	Margigliano, Italy
Subcategory	VILLA
Built in	2007
Opened in	2007
Application	Installation of glass mosaic
Application Type	Floor/wall coverings
Contractor company	Petroni
Installer companies	Petroni
MAPEI Distributor	Edil Termo srl
Credits	Sergio Fortuna

Product used for the project

ADESILEX P10

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes.…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

IDROSTOP

Hydrophilic expandable rubber section for watertight construction joints. Idrostop is a soft preformed flexible strip, with an acrylic polymer base specially designed to form watertight construction…

Hydrophilic expandable rubber section for watertight construction joints.…

IDROSTOP MASTIC

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready-to-use solvent-free one-component MS polymer based adhesive. On extrusion, it is a thixotropic paste suitable for…

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPEFER 1K

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting…

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER FD

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 200 g bottles.

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…