Project S.Cesarea Thermal SpA, S.Cesarea Terme


Yard	global SpA restoration
Location	S.Cesarea Terme, Italy
Subcategory	HOTEL/INN
Built in	2011
Opened in	2012
Application	Ceramic installation, structural strenghtening and painting
Application Type	Waterproofing systems
Client	Terme di S. Cesarea SpA
Contractor company	f.lli Perrotta snc
Installer companies	f.lli Perrotta snc
Architects	ing. Tartini; ing. Codazzo; arch. Criniti
Credits	ing. Dispoto
Project Manager	ing. Rocco Tartini

ADESILEX PG2

DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability time for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C).…

DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability…

ELASTOCOLOR PITTURA

TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm ³ ): approx. 1.37. Dry solids content: (EN…

TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY ADHESIVE

TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey and white. Application: suitable notched…

TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to…

MAPEFER 1K

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of water. Pot life of mix: approximately 1 hour (at +20°C). Minimum applicable thickness: 2 mm. Waiting…

Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K…

MAPELASTIC FOUNDATION

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C QUADRI-AX

Balanced, high-strength, quadri-directional carbon fibre fabric

MAPEWRAP G FIOCCO

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP 200 - Smoothing Mortar

DESCRIPTION: One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to…

DESCRIPTION: One-component cementitious mortar with high bonding strength for…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…