Project Giorgio Gaber Lirico Theatre, Milan


Yard	historical theatre
Location	Milan, Italy
Subcategory	THEATRE
Built in	1776
Opened in	1796
Application	supplying technical support on site and products for structural strengthening, restoring and rebuilding renders, restoring existing coatings and applying new coatings helyszíni folyamatos műszaki segítségnyújtás, vakolatok helyreállítása, rehabilitációja, vízszigetelés és burkolatok lerakása, meglévő burkolatok helyreállítása és új burkolatok készítése
Start and finish date	2015/2021
Application Type	Concrete restoration systems, Facade interventions, Masonry restoration
Client	Milan City Council, Councilor for Public Works and House – Technical Area for Culture
Contractor company	Impresa Garibaldi - Fragasso
Specialists involved	Executive design and works direction: Pasquale Francesco Mariani Orlandi, Milan City Council Superintendency of Archeology, Fine Arts and Environment: Antonella Ranaldi, Paolo Savio
Credits	Gianni Dal Magro
Project Manager	Massimiliano Papetti, Milan City Council
MAPEI Coordination	Davide Bandera, Alberto Arosio, Mapei SpA (Italy)
Other	Francesco Maggiore, Fondazione Dioguardi
Link to details page	https://www.mapei.com/pl/pl/aktualnosci/2024/09/02/wielkie-otwarcie-teatru-lirycznego-giorgia-gabera-po-22-latach-zamkni%C4%99cia

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPECURE SRA

Curing admix with the property of reducing hydraulic shrinkage and the formation of micro-cracking. Mapecure SRA is a special, chloride-free liquid admix, specially developed to drastically reduce…

Curing admix with the property of reducing hydraulic shrinkage and the…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFLOOR FINISH 58 W

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if…

MAPEGRID G 220

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh size: 25 x 25 mm. Tensile strength (kN/m): 45. Elongation at failure: < 3%. Packaging: 45.70 m x 90 cm rolls.

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP 200 - Smoothing Mortar

DESCRIPTION: One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to…

DESCRIPTION: One-component cementitious mortar with high bonding strength for…

PLANITOP HPC FLOOR

DESCRIPTION: One-component, ultra-high strength, highly ductile, highly fluid, fibre-reinforced, compensated shrinkage cementitious mortar for strengthening the external face of floor slabs.…

DESCRIPTION: One-component, ultra-high strength, highly ductile, highly fluid,…

PRIMER 3296

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…

TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…