Project Hilton Hotel u Dubrovniku, Dubrovnik

Hilton Hotel u Dubrovniku

Dubrovnik, Croatia

Ref #: 3846

Category: COMMERCIAL FACILITIES

Construction


Yard	New floorings
Location	Dubrovnik, Croatia
Subcategory	HOTEL/INN
Built in	2006
Opened in	2006
Application	Installation of ceramic and natural stone tiles
Application Type	Floor/wall coverings
Installer companies	AB KERAMIKA, Dubrovnik, Croatia
Architects	Alfa Plan, Stijepo Butijer
MAPEI Distributor	AB KERAMIKA, Dubrovnik, Croatia
Credits	Hotel Hilton Imperial

Product used for the project

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

GRANIRAPID

DESCRIPTION: High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. APPLICATIONS: Particularly suitable for the…

DESCRIPTION: High performance, deformable, fast setting and hydration…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPEFOAM

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGUM WPS - Liquid Waterproofing Membrane

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage:…

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…