Project Elite Park, Budapest


Yard	homlokzat, vízszigetelés, mélygarázs, lakások
Location	Budapest, Hungary
Subcategory	RESIDENCE
Built in	2022
Opened in	2024
Application	facade system, waterproofing, garage floor, tiling
Start and finish date	2022/2024
Application Type	Cementitious & resin flooring systems, Facade interventions, Floor/wall covering, New building, Products for wood flooring, Tile & stone installation systems, Waterproofing systems
Client	BAYER Ingatlanfejlesztő Zrt.
Contractor company	BAYER Ingatlanfejlesztő Zrt.
Installer companies	BESÉP Kft., KM Par-Ker Kft., Isogeneral Kft., Hydroproof Kft., Kővég Kft., Turul Padló Kft.
Architects	KAS Design Kft.
MAPEI Distributor	Bau-Systeme 92 Kft.
Credits	Homestage Film
MAPEI Coordination	Habling Károly

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

MAPEBAND EASY

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…

MAPEFLOOR PARKING SYSTEM RLT

MULTI-LAYERED, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT COMPLIANT WITH THE REQUIREMENTS OF CLASS OS 8 (EN 1504-2) FOR COATING ROAD SURFACES IN CAR PARKS SUBJECTED TO LIGHT TO MEDIUM TRAFFIC.…

MULTI-LAYERED, NON-SLIP EPOXY SYSTEM WITH 100% SOLIDS CONTENT COMPLIANT WITH…

MAPEGUM WPS - Liquid Waterproofing Membrane

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage:…

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…

MAPELASTIC FOUNDATION

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2…

Save time and money Fast track your next interior levelling project Two coat application - apply the second as soon as the first coat is dry Install a levelling compound 2 to 5 hours after the second…

Save time and money Fast track your next interior levelling project Two coat…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

POLYPRIMER

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is used as a primer for concrete surfaces, to stop dusting and saturate their porosity, allowing traditional or…

Bituminous primer made with blown bitumen and hi-tech solvents. POLYPRIMER is…

ULTRABOND ECO V4 EVOLUTION

The only flooring adhesive you need in the back of your van. Rapid and strong initial tack, very long open time, good dimensional stability, strong and tenacious final adhesion: the best performance…

The only flooring adhesive you need in the back of your van. Rapid and strong…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…