Project Complexe Courcellor, Levallois-Perret

Complexe Courcellor

Levallois-Perret, France

Ref #: 6068

Category: COMMERCIAL FACILITIES

Construction


Yard	Complexe Courcellor II
Location	Levallois-Perret, France
Subcategory	SHOPPING CENTER
Application	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
Start and finish date	2011/2012
Application Type	Floor/wall coverings
Client	Semalrep, Nexity
Architects	Calq Architecture, Epstein et Glaiman, Recevki Architecture
MAPEI Distributor	Triomat
Credits	Stéphane Lévy, JM Giraudeaux

Product used for the project

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

LAMPOSILEX

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing…

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use…

MAPECEM PRONTO

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before…

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…

MAPEGROUT T60

DESCRIPTION: Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete. Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and…

DESCRIPTION: Sulphate-resistant thixotropic fibre-reinforced mortar for the…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C UNI-AX

High strength uni-directional continuous carbon fibre fabric with high and very high moduls of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…

High strength uni-directional continuous carbon fibre fabric with high and very…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

ULTRATOP

Description Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5 to 40 mm. Application Ultratop may remain on…

Description Ultra-quick setting self-levelling mortar based on special…