Project Aquacity Poprad, Poprad

Aquacity Poprad

Poprad, Slovakia

Ref #: 4478

Category: SPORT FACILITIES

Construction


Yard	Floor/wall coverings
Location	Poprad, Slovakia
Subcategory	Spa
Built in	2008
Opened in	2008
Application	Ceramic tiles installation
Application Type	Floor/wall coverings
Contractor company	T-design, s.r.o.
Installer companies	INGSTEEL, s.r.o.
Architects	Ing. Arch. Pavel Kučera, Ing. Arch. Filip Rubáš
MAPEI Distributor	MAPEI SK, s.r.o.
Project Manager	ARCHSTUDIO, s.r.o. Brno

Product used for the project

ADESILEX P10

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes.…

IDROSTOP MASTIC

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a ready-to-use solvent-free one-component MS polymer based adhesive. On extrusion, it is a thixotropic paste suitable for…

One-component adhesive for the installation of Idrostop. Idrostop Mastic is a…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building…

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

ULTRACARE FUGA FRESCA

Polymeric paint to refresh the colour of the cementitious grout joints between tiles

Polymeric paint to refresh the colour of the cementitious grout joints between…

This product replaces FUGA FRESCA

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…