Back

ULTRATOP

Description

Ultra-quick setting self-levelling mortar based on special hydraulic binders, for abrasion-resistant floor coverings at a thickness from 5 to 40 mm.

Application

Ultratop may remain on view as a finished floor surface, and is used inside industrial and civil buildings to form abrasion-resistant floors.

Used neat, it is particularly recommended for floors in industrial warehouses, stock-rooms subject to traffic with rubber wheels, car-parks, shopping centres and shops. If polished, it is ideal for use inside civil buildings, such as showrooms, offices, shops, restaurants and flats. If mixed with Dynastone Color aggregates or with natural aggregates, Ultrarop may be used to create floors similar to "Terrazzo alla Veneziana". The product is available in the following colours: light grey, white, beige, red, anthracite and standard. After preparation, which is carried out by mixing Ultratop with water, the mortar may be applied manually, or mechanically using a spray rendering machine, on clean surfaces which have been treated with a special primer. The abrasion-resistance of Ultratop, which is considerably high, may be further improved by applying a finishing treatment on the surface using Mapefloor Finish 50 or Mapefloor Finish 52 W. These products, to which Keraseal may be added as a protective treatment after polishing, are indispensable to make Ultratop impermeable to water and oil. If high chemical resistance is required, after only 24-36 hours of applying Ultratop, the surface may be coated with Mapefloor System or protected with epoxy paint, such as Mapecoat I 24, Mapecoat I 620 W or Mapefloor I 300 SL.