Product detail

MAPEFLOOR CPU/COVE

TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of MAPECOLOR PASTE. Colour of mix: depending on the colour of MAPECOLOR PASTE used. Pot life of mix at +20°C: 20 minutes.…

TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of…

MAPEFLOOR FINISH 451

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 7 : 3. Colour of mix: coloured. Please contact Head Office. Consistency of mix: fluid paste. Density of mix (kg/m³): 1,480. Viscosity of mix (mPa·s):…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 7 : 3. Colour of mix:…

MAPEBAND SA

TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm. Thickness: approx. 2 mm. Packaging: 25 m rolls.

TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to…

MAPEGRID G 220

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh size: 25 x 25 mm. Tensile strength (kN/m): 45. Elongation at failure: < 3%. Packaging: 45.70 m x 90 cm rolls.

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…

Primer for Aquaflex

DESCRIPTION: Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes (from the Aquaflex Roof line) onto existing bituminous membranes

DESCRIPTION: Synthetic resin-based primer in solvent solution to improve the…

DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability time for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C).…

DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability…

MAPESHIELD E (INDENT ONLY)

Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete. Mapeshield E comprises a 99.9% pure zinc…

Adhesive zinc plates applied directly on the surface of structures for galvanic…

MAPELASTIC FOUNDATION

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…

TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2…

MAPEFLOOR CPU/HD

TECHNICAL DATA: Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, ochre, red and green. Consistency of mix: thick. Pot life of mix at +20°C: 15 minutes. Dust…

TECHNICAL DATA: Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU.…

MAPEFLOOR I 900

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix: transparent amber. Consistency of mix: viscous fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix:…

ANTIPLUVIOL W

TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active substance content (%): 8. Dilution rate: supplied ready to use. Surface drying time:…

TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO…

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing expansion joints and cracks subject to movements up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively. It is particularly…

TPE tape for flexible sealing and waterproofing expansion joints and cracks…

PLANITOP HDM RESTAURO

TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg comp. A with 1 drums of comp. B. Pot life of mix: approximately 1 hour (at +20°C). Thickness applied: from 3 to 10 mm per…

TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

MAPEWRAP G FIOCCO

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…

MAPEWRAP C FIOCCO

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of…

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid…

MAPEWRAP 31 SP

Medium viscosity epoxy resin for impregnation of MapeWrap with “dry system” MapeWrap 31 SP is a gelatinous solvent-free epoxyresin based adhesive specially developed in the MAPEI research…

Medium viscosity epoxy resin for impregnation of MapeWrap with “dry system”…

MAPEWRAP C UNI-AX

High strength uni-directional continuous carbon fibre fabric with high and very high moduls of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…

High strength uni-directional continuous carbon fibre fabric with high and very…

MAPENET 150

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

Keep in touch