TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 16 : 3.9. Colour of mix: neutral. Consistency of mix: fluid. Pot life at +20°C: 30 minutes. Dusty dry: 2-4 hours. Set to light foot traffic: 24…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 16 : 3.9. Colour of mix:…
Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…
Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2 according to the absorption of the substrate. Drying time: 1-5 days. Waiting time before laying with vinyl…
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…
Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…
Ultra-fast hardening self-levelling smoothing compound with very low VOC…
Fibre-reinforced ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling thicknesses from 3 to 10 mm of existing and new wooden floors, wooden boarding, chip-board…
Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building…
Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for…
One-component, epoxy-polyurethane adhesive with very low emission of volatile organic compounds (VOC) for bonding synthetic grass surfaces. Where to use: Bonding jointing strips between synthetic…
One-component, epoxy-polyurethane adhesive with very low emission of volatile…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC flooring. Where to use: Bonding of conductive flooring in: - all areas where electrostatic charges may cause fire or disturb…
Two-component epoxy-polyurethane adhesive for conductive rubber and PVC…
Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and…
Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or…
TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before…
TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…
TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…
TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey and white. Application: suitable notched…
TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to…
High performance ready-to-use paste adhesive with no vertical slip and extended open time, for ceramic tiles. Applications: Interior floor and wall bonding and exterior wall bonding of all types of…
High performance ready-to-use paste adhesive with no vertical slip and extended…
Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…
Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…
Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…
Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…
TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes.…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours using the ColorMap ® automatic colouring system. Density (EN ISO 2811-1) (g/cm ³ ): approx. 1.37. Dry solids content: (EN…
TECHNICAL DATA: Consistency: thick liquid. Colour: white or various colours…
-ltd-logos/mapei---header-logo.png?sfvrsn=31878676_6){kind=logo}
-ltd-logos/mapei-mobile-logo-266-x-62.png?sfvrsn=30878676_2){kind=logo}
