Back

UNIPLAN 410 DR ZERO

Pumpable rapid drying, fibre-reinforced, dust-reduced, cement-based, self-levelling compound for thicknesses from 3 to 50 mm per layer.

UNIPLAN 410 DR ZERO is a rapid drying, dust-reduced, self-levelling compound used in interiors for levelling and smoothing differences in thicknesses from 3 to 50 mm on new or existing substrates, preparing them to receive all kind of resilient floor covering types, floating parquet and laminate, ceramic and natural stone. UNIPLAN 410 DR ZERO is especially suitable for wet rooms.

Mapei Research & Development laboratories work intensely on product formulations in order to reduce CO₂ emissions* associated with our products.

* CO₂ emissions measured throughout the life cycle of UNIPLAN 410 DR ZERO from the Zero line using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of renewable energy and forestry protection projects. A commitment to the planet, to people and to biodiversity.

For more details on how emissions are calculated and on climate mitigation projects financed through certified carbon credits, visit the webpage zero.mapei.com.

ADVANTAGES

Application thickness from 3 to 50 mm per layer.
Dust-reduced.
Suitable for hand- or pump application.
Very good self-levelling properties.
Very good surface finish.
Ready for covering after 1 - 3 days, up to 30 mm 1 day, up to 40 mm 2 days, up to 50 mm 3 days.
Fibre-reinforced.
Suitable for floating floors (minimum layer thickness 30 mm).
Suitable for heated floors.
Suitable for flat levelling and slope building.
High bonding strength to the substrate.
High compressive and flexural strength.
Suitable for all kinds of floorings, resilient, textiles, floating parquet and laminate, ceramic and natural stone.
Very low emissions - EMICODE EC1 Plus.
Product-specific EPD.
Residual Greenhouse Gas emissions offset through the acquisition of certified environmental credits.