Project Pontedera Skyscraper, Pontedera


Yard	façades restoration
Location	Pontedera, Italy
Subcategory	RESIDENCE
Built in	2009
Opened in	2010
Application	façades restoration
Application Type	Concrete restoration systems
Client	Condominio Pontedera
Contractor company	LGS Restauri
Installer companies	LGS Restauri
Credits	Sergio Fortuna

ADESILEX P9

High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and…

High performance cementitious adhesive with no vertical slip and extended open…

ADESILEX T SUPER

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid liquid. Final tensile strength: like the bonded PVC-pipe. Dry solids content: 35%. Colour: red. Application: brush.…

Adhesive for welding high-pressure PVC pipes. TECHNICAL DATA: Viscosity: fluid…

ANTIPLUVIOL

Silicone water-repellent in water solution for exterior walls. Use Antipluviol for the protection of absorbent vertical and inclined surfaces including finished concrete, renders, facing bricks and…

Silicone water-repellent in water solution for exterior walls. Use Antipluviol…

Protective and decorative elastic paint based on acrylic resins in water dispersion. Elastocolor Paint is used to protect the surfaces of concrete and cement renders from aggressive agents present in…

Protective and decorative elastic paint based on acrylic resins in water…

KERACOLOR GG

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide.

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

MALECH

Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…

Micronized acrylic-based primer in water dispersion. Malech is used as a primer…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFLEX AC4

Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and fillet joints with movements of up to 12.5% of the width of the joint on ceramic, marble and natural stone façades and…

Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and…

Mapegrout Thixotropic

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use Mapegrout Thixotropic for all concrete repairs such as: reconstruction of concrete cover, repairs of corners, beams,…

Controlled-shrinkage fibre-reinforced mortar for the repair of concrete. Use…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2 mm), applied by trowel or with a roller, for waterproofing balconies, terraces, bathrooms and swimming pools

Two-component, high-flexibility cementitious mortar (with crack-bridging > 2…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

NIVOPLAN

Levelling mortar for interior and exterior walls and ceilings. Applications: Interior and exterior levelling "out-of-plumb" walls, rough or damaged renders, brick walls before laying ceramic tiles.…

Levelling mortar for interior and exterior walls and ceilings. Applications:…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLANITOP 200

One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to smooth…

One-component cementitious mortar with high bonding strength for interior and…

PLANITOP 400

Fast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying in a single coat a thickness of mortar variable between 1 and 40 mm. Planitop 400 is used for…

Fast setting shrinkage compensated thixotropic mortar for cortical restoration…

PLANITOP 430

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage, medium-strength (30 N/mm2) mortar for repairing concrete Where to use To repair the concrete cover on deteriorated concrete…

Fine-grained thixotropic, fibre-reinforced, controlled-shrinkage,…

MAPEBAND

Product not available for this market,
contact us

Pontedera Skyscraper

Construction

Browse the project Gallery

Product used for the project

Keep in touch