Project Coppedè Condominium, Rome


Yard	restoration of façades
Location	Rome, Italy
Subcategory	CONDOMINIUM
Built in	2009
Opened in	2010
Application	façades restoration and painting
Application Type	Masonry restoration
Client	Soprintendenza del Comune di Roma
Contractor company	Si. Re. Co. srl
Architects	arch. Antonio Zonfrillo
Credits	Corrado Villa Presutti

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

ANTIPLUVIOL S

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S for the protection of vertical or inclined surfaces (façades) made of concrete, cementitious render, bricks and natural…

Transparent siloxane resin-based water-repellent compound. Use Antipluviol S…

COLORITE PERFORMANCE

Acrylic resin-based paint in water dispersion for protecting and decorating external and internal surfaces. Colorite Performance is a paint for internal and external walls, made up of…

Acrylic resin-based paint in water dispersion for protecting and decorating…

CONSOLIDANTE 8020

Reversible consolidating product in solvent for the conservative restoration and consolidation of porous stone substrates, lime render and layers of paint. TECHNICAL DATA: Consistency: colourless…

Reversible consolidating product in solvent for the conservative restoration…

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material (thickness of…

Two-component, high-performance, highly-deformable, quick-setting and drying…

EPOJET LV

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…

Two-component epoxy resin with a very low viscosity for injecting into…

MALECH

Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…

Micronized acrylic-based primer in water dispersion. Malech is used as a primer…

MAPE-ANTIQUE FC

Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively light-coloured and light pink, for finishing dehumidifying mortars applied on stone, brick and tuff masonry. Mape-Antique FC is a…

Cement-free lim- and Eco-Pozzolan-based fine mortars, respectively…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for consolidating, by injection, stone, brick work and tuff structures. Mape-Antique I is a pre-blended sulphate-resistant binder…

Cement-free fillerized hydraulic lime- and Eco-Pozzolan-based binder, for…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPE-ANTIQUE RINZAFFO

Light-coloured salt-resistant cement-free pre-packed lime- and Eco-Pozzolan-based mortar to be used before applying Mape-Antique MC, Mape-Antique CC and Mape-Antique LC, dehumidifying mortars on…

Light-coloured salt-resistant cement-free pre-packed lime- and…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP G FIOCCO

High-strength glass fibre cord to be impregnated with MAPEWRAP 21 (two-component, super-fluid epoxy resin) to make “structural connections”. TECHNICAL DATA: Type of fibre: E type glass. Diameters…

High-strength glass fibre cord to be impregnated with MAPEWRAP 21…

PLANITOP 400

Fast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying in a single coat a thickness of mortar variable between 1 and 40 mm. Planitop 400 is used for…

Fast setting shrinkage compensated thixotropic mortar for cortical restoration…

PLANITOP 560

Lime-cement based finishing compound for very smooth finishing of both fresh and cured interior and exterior cementitious renders can be applied from 0 to 3 mm thick. Planitop 560 is used for…

Lime-cement based finishing compound for very smooth finishing of both fresh…

SILANCOLOR CLEANER PLUS

Anti-mould and anti-alga cleaning product in a watery solution. Silancolor Cleaner Plus is a water-based anti-mould and anti-alga solution used to clean surfaces damaged by mould and algae before…

Anti-mould and anti-alga cleaning product in a watery solution. Silancolor…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

MAPEWRAP G UNI-AX

Product not available for this market,
contact us

Coppedè Condominium

Construction

Browse the project Gallery

Product used for the project

Keep in touch