Project Complexe Courcellor, Levallois-Perret


Yard	Complexe Courcellor II
Location	Levallois-Perret, France
Subcategory	SHOPPING CENTER
Application	réparation des fissures et bétons, ragréage mural et finition des bétons, renforcement structural, le scellement d’éléments, imperméabilisation et blocage d’infiltrations d’eau, ragréage de sol et rattrapage de niveaux
Start and finish date	2011/2012
Application Type	Floor/wall coverings
Client	Semalrep, Nexity
Architects	Calq Architecture, Epstein et Glaiman, Recevki Architecture
MAPEI Distributor	Triomat
Credits	Stéphane Lévy, JM Giraudeaux

CARBOPLATE

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a double film of plastic. Carboplate is a range of pultrused carbon fibre plates, pre-impregnated in epoxy resin, with high…

Pultrused carbon fibre plates pre-impregnated in epoxy resin, protected by a…

EPOJET

Two-component superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and…

Two-component superfluid epoxy resin for injection. Epojet is used for…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. Use Idrosilex Pronto to waterproof foundations, walls, cellars, basements,…

Osmotic cementitious mortar suitable for contact with drinking water, for…

LAMPOSILEX

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing…

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use…

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP C UNI-AX

High-strength, unidirectional carbon fibre fabric with a high modulus of elasticity. TECHNICAL DATA: Weight: 300-600 g/m². Equivalent thickness of dry fabric: 0.164-0.331 mm. Tensile strength: ≥…

High-strength, unidirectional carbon fibre fabric with a high modulus of…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP 400

Fast setting shrinkage compensated thixotropic mortar for cortical restoration of concrete by applying in a single coat a thickness of mortar variable between 1 and 40 mm. Planitop 400 is used for…

Fast setting shrinkage compensated thixotropic mortar for cortical restoration…

PRIMER G

Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC)

Synthetic resin-based water-dispersion primer with very low volatile organic…

ULTRAPLAN MAXI

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 30 mm. Applications: Interior levelling of new and existing substrates to make them suitable for receiving all types…

Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3…

ULTRATOP

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors. TECHNICAL DATA: Colour: white, beige,…

Self-levelling, ultra-quick hardening mortar with special hydraulic binders,…