Project Bulgaria Hotel, Burgas


Yard	interior and exterior
Location	Burgas, Bulgaria
Subcategory	HOTEL/INN
Built in	2019
Opened in	2020
Application	floor leveling, structural strenghtening, facades renovation, ceramic installation
Start and finish date	2019/2020
Application Type	Facade interventions, Floor/wall covering, Tile & stone installation systems
Client	Hotel Bulgaria management
Contractor company	SMK Invictus
Installer companies	SMK Invictus, Skarlevi Engineering
Project Manager	Georgi Papazov

ADESILEX P9

High performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles. Applications: Interior and exterior floor and wall bonding of all types of ceramic tiles and…

High performance cementitious adhesive with no vertical slip and extended open…

COLORITE PERFORMANCE

Acrylic resin-based paint in water dispersion for protecting and decorating external and internal surfaces. Colorite Performance is a paint for internal and external walls, made up of…

Acrylic resin-based paint in water dispersion for protecting and decorating…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX EASY S1

Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic tiles and stone materials. With very low emission of volatile organic…

Easy-to-apply high-performance deformable cementitious adhesive with extended…

MALECH

Micronized acrylic-based primer in water dispersion. Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat…

Micronized acrylic-based primer in water dispersion. Malech is used as a primer…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore…

Pure, mould-resistant, acetic silicone sealant with BioBlock® technology for…

MAPETHERM NET

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and levelling layers to repair facades and for Mapetherm thermal insulation systems. This product helps the smoothing and…

Glass fibre mesh resistant to alkalis, used for reinforcing smoothing and…

PLANISEAL 288

Two-component, polymer-modified, cementitious mortar for waterproofing

PRIMER G

Synthetic resin-based water-dispersion primer with very low volatile organic compound (VOC)

Synthetic resin-based water-dispersion primer with very low volatile organic…

PRIMER SN

Two-component fillerized epoxy primer, in compliance with the Radon gas tightness standards

Two-component fillerized epoxy primer, in compliance with the Radon gas…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating water. The reaction time may be regulated.…

One-component, ultra-fluid polyurethane resin applied by injection for…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…