Acrylic sealant suitable for painting over. Sealing expansion, shrinkage and fillet joints with movements of up to 12.5% of the width of the joint on ceramic, marble and natural stone façades and thermal insulation. Also Ideal for sealing the surface of cracks subject to movement. Mapeflex AC4 may also be applied on all porous surfaces, such as concrete, wood, gypsum, render, bricks and cements even if they are quite damp. Once the water has completely evaporated off, Mapeflex AC4 forms a seal which is resistant to driving rain and which may be painted over with conventional paints normally used in the building industry. Joints sealed with this product are flexible at temperatures of from -30°C to 80°C and guarantee high resistance during inclement weather. Certified according to ISO 11600 F 12.5 P up. Please refer to the Technical Data Sheet before use.
Colours available white and grey.
Consumption 3.1 meters per 310 ml cartridge (10x10 mm section).
Packaging boxes of 12 cartridges of 310 ml and 25 kg soft cartridges.
If you wish to save the calculation result, log in to the website.
The calculation is based on the actual volume to be filled and the product density.
The provided data should be considered indicative and for estimation purposes only, as certain factors that may still affect the actual consumption cannot be considered (for example, tile roughness, excess residual product, surface irregularities, etc.).
Enter the name of your project
Saved project!
Elastic joint design
a - width of joint
from 0 to 4 [mm]
from 5 to 9 [mm]
from 10 to 20 [mm]
from 21 to 40 [mm]
greater than 40 [mm]
b - depth of joint
increase the width of the joint
b = a
b = 10 [mm]
b = a/2[mm]
reduce the width of the joint
To set the depth of the joint and prevent sealant adhering to the bottom, insert MAPEFOAM closed-cell, extruded foam polyethylene cord, supplied in rolls in various lengths according to the diameter of the cord, down into the joint.